Should I Replace One Garage Door Spring or Two?

March 7, 2015

When you find yourself looking up at your broken garage door spring with a garage door service technician, you will probably be asked: “Would you like to replace one spring or two?”. If your door has two springs, the quick answer is most definitely change both springs to not only save yourself money but also to prevent any more inconvenience in the near future from another broken spring. Both springs have completed the same number of cycles which means they have the same exact amount of wear. Let’s take a look at a few different scenarios and see if any look similar to your situation.

Our Pick
Garage Door Torsion Spring Replacement
$191.30

Torsion spring replacement is a complex job which is best performed by a qualified, trained and licensed professional. Torsion springs can be very dangerous if they are improperly installed or mishandled because they are under tension. A mistake in this process can cause severe damage to your home or body.

Buy on Amazon Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 09/19/2020 05:41 pm

Why Do Garage Door Springs Break?

2″ gap in broken torsion spring

The life of a garage door spring is based on cycles and the minimum specification is 10,000 cycles. That means the garage door will go up and down on average 10,000 times before the spring breaks. The more you use your garage door, the sooner the spring will need to be replaced. Back when homeowners used their front door to enter the home, garage door springs would last 10-15 years. Today, since the garage door is used as the main entry point we are seeing springs break in 4-5 years. Garage door springs break because of usage, not because it’s cold outside or because there is rust on the spring. Those are myths.

Do I Need to Have Two Springs Installed If My Garage Door Has Only One Spring?

Single broken garage door torsion spring

No. If your garage door was originally set up with only one torsion spring, then you are perfectly fine with having only one spring put back on the door. If your garage door has two springs pulling the door up, then definitely have both replaced. The second spring will break, it’s just a matter of time which is usually within 6 months. Have both springs replaced while the repair company is there to save money.

Many repair companies will try to upsell you and recommend installing a two spring system when you only have one. While two springs do last longer than one, you don’t have to go back with two unless you want to spend a little more money to get a longer life on the springs. It is important to hire a reputable garage door company so the technician is honest and upfront with you.

Is It Better to Have Two Torsion Springs?

New pair of garage door torsion springs

Yes and no. Two springs will increase cycle life and help you get out of a bind when one spring breaks. Since torsion springs don’t break at the same time, you can usually lift your garage door with the help of the unbroken spring that is pulling the door with the cables still intact. The cables will remain on the drums since one spring is still wound making it possible to lift the door with the help of a family member or neighbor. The downside is two springs do cost more but they will provide more cycles which means they will last longer.

All extension spring setups utilize two springs to pull the garage door up. If your garage door has extension springs mounted above the tracks, it is always a good idea to replace those in pairs. This will ensure the springs are pulling the door evenly as it goes up and down. If you are buying garage door springs online, you need to make sure you buy the right size for your garage door. 

A standard non-insulated 8×7 garage door will use 90# Extension Springs. A standard four panel wood door that is about 1 ½” thick will use 130# Extension Springs. When you replace extension springs, you always do it with the garage door in the up position and a pair of vise grips clamped under one of the rollers so the door will not fall to the ground. Go ahead and pull the red rope on the garage door opener to disconnect it from the door so no one tries to open or close the garage door while you are working on it. 

Do I Need to Replace the Cables on My Garage Door When My Spring Breaks?

No. Unless you have a frayed cable that is showing physical signs of wear, there is usually no reason to change your cables. Garage door cables will usually last through a few spring changes. Your technician should be able to show you where your cable is damaged if they are recommending replacement. If it makes you feel better, you can replace the cables for a little extra insurance. That is completely up to you.

Do I Have to Replace the Rollers on My Garage Door When My Spring Breaks?

It is a good idea to replace your garage door rollers when you are having the springs replaced. Garage door rollers have an expected life similar to your garage door springs, around 10,000 cycles. It is good practice to replace the rollers when having your springs replaced to keep your garage door in good working order.

Garage door rollers play an important role in the garage door ecosystem. When you have good rollers and they are running properly, your garage door will operate more efficiently. This will reduce any unwanted stress on your electric opener. This will help reduce maintenance costs down the road. Many garage door and electric opener issues are cause and effect. When one thing is not operating the way it should be, it will have a negative impact on another component, therefore causing premature wear.

If you have had them replaced recently, then you should be fine.

Common Signs of a Broken Garage Door Spring Recap

  • Cables are loose on one side or both
  • Garage Door goes up 6″ when trying to open it with your electric garage door opener
  • Garage Door is jerky when going up (you might have 2 springs and only 1 is broken)
  • Garage door falls fast when going down using the electric garage door opener (you might have 2 springs and only 1 is broken)
  • When you release the electric garage door opener from the door, the door cannot be physically lifted
  • The electric garage door opener tried to lift the door and it bent your top section
  • On extension spring setups, the door might be crooked because a spring is broken on one side

We have seen many instances where a homeowner never knew they had a broken spring on their garage door because their electric opener was strong enough to pull the door up and down with only one good spring. This is a scary situation because if anyone was to pull the red emergency release cord, the garage door would fall to the ground.

If your garage door opener is set up properly, the sensitivity should activate and stop a few inches off the ground when trying to open a door with a broken spring. This mainly pertains to garage doors that have two torsion springs because the good spring will still hold the cables in place. Otherwise, the cables on the sides would be all over the place.

Amazon Home Services offers garage door spring replacement in many areas. They use Handpicked Pro’s, offer Upfront Pricing, and also have a Happiness Guarantee to make sure you are satisfied with your service. 

Our Pick
Garage Door Torsion Spring Replacement
$191.30

Torsion spring replacement is a complex job which is best performed by a qualified, trained and licensed professional. Torsion springs can be very dangerous if they are improperly installed or mishandled because they are under tension. A mistake in this process can cause severe damage to your home or body.

Buy on Amazon Learn More
We earn a commission if you click this link and make a purchase at no additional cost to you. 09/19/2020 05:41 pm

Related Articles

{"email":"Email address invalid","url":"Website address invalid","required":"Required field missing"}